Project

General

Profile

Installing Wt on MS Windows » History » Version 41

Charles Brockman, 07/10/2012 10:17 PM
Reordered sections. Raised "Running the Examples" up one level in the heading hierarchy.

1 15 Pieter Libin
h1. Installing Wt on MS Windows
2 1 Pieter Libin
3
{{toc}}
4
5 16 Wim Dumon
This HOWTO assumes you have a clean Windows system and want to use Wt 2.1 or newer series. We start with the download of the compiler and system libraries. We continue to explain where the dependency libraries can be found and how they are installed. Then the configuration of Wt is covered, and finally we build Wt and run the examples.
6 1 Pieter Libin
7 38 Charles Brockman
Unlike Linux distributions, Windows has no easy package managers for developers. To avoid compiling dependencies for half a day before you can use Wt, we strongly reduced the minimal dependencies that Wt requires. Since Wt 2.1, Boost and CMake are the only required dependencies. We will explain two approaches to set up your environment: the quick method, using binary packages, and the thorough method, in which you compile more dependencies, but which will also result in a Wt that supports compression, SSL, etc.
8 1 Pieter Libin
9 13 Pieter Libin
These instructions have been tested both on Windows XP and Windows Vista. These instructions are valid for all 2.1 and newer versions of Wt.
10 1 Pieter Libin
11 41 Charles Brockman
h2. Setting Up Your Compiler 
12 1 Pieter Libin
13 38 Charles Brockman
You need Microsoft Visual Studio 2005 or newer, Professional or Express Edition (C++). The difference is that the former is payware, whereas the latter is a free, reduced version of MSVC. The good news is that the Express Edition is perfect to compile Wt.
14 1 Pieter Libin
15 16 Wim Dumon
For more information about the compiler, see [[Installing MSVC]].
16 1 Pieter Libin
17 34 Wim Dumon
Note for MSVC 2010 SP1 users: "FIX: Visual C++ compilers are removed when you upgrade Visual Studio 2010 Professional or Visual Studio 2010 Express to Visual Studio 2010 SP1 if Windows SDK v7.1 is installed":http://support.microsoft.com/?kbid=2519277
18
19 13 Pieter Libin
h2. The Quick Method 
20 1 Pieter Libin
21 13 Pieter Libin
The quick method installs Wt without any optional components (compression-over-HTTP and support for HTTPS)
22 1 Pieter Libin
23 13 Pieter Libin
h3. Download Dependencies 
24 1 Pieter Libin
25 36 Wim Dumon
* Install Boost. Either download binaries from BoostPro, or compile your own:
26 38 Charles Brockman
> * Download the BoostPro installer for version 1.36 or newer (there are problems with boost 1.46 and 1.47 with Wt < 3.1.11) from "boost-consulting":http://www.boost-consulting.com/download/. (You might need to register in order to download the BoostPro installer.) Run it and install all types for all libraries for the correct version of your MSVC compiler at a location of your choice.
27
> * To compile Boost yourself, download the Boost sources from boost.org. Boost has a tendancy to frequently change its installation instructions, but for some time it has been:
28 36 Wim Dumon
<pre>
29
bootstrap
30
bjam --layout=versioned --toolset=msvc-10.0 variant=debug threading=multi link=static runtime-link=shared install
31
bjam --layout=versioned --toolset=msvc-10.0 variant=release threading=multi link=static runtime-link=shared install
32
</pre>
33 38 Charles Brockman
* Download the "cmake 2.8":http://www.cmake.org/ (cmake > 2.4.6 required) Windows Installer. Run the installer to install CMake.
34 35 Wim Dumon
* Download Wt from the "download page":http://www.webtoolkit.eu/wt/download. Unzip it somehwere (c:/projects/witty/wt-3.x.x).
35 1 Pieter Libin
36
h3. Configuring Wt 
37
38 39 Charles Brockman
* Start the CMake GUI from the Start->CMake menu
39
* At the top of the window that opens, fill in or browse to the source and binary directories:
40
** Where is the source code: c:\projects\witty\wt-3.x.x
41
** Where to build the binaries: c:\projects\witty\wt-3.x.x\build
42 13 Pieter Libin
* Click Configure
43 35 Wim Dumon
* Select Visual Studio 2005 or 2008 or 2010
44 1 Pieter Libin
45 39 Charles Brockman
You will probably get errors about Boost not being found. That is normal, as you did not yet tell where the library is located. Set the BOOST_PREFIX variable to match your configuration. For example:
46
* BOOST_PREFIX = c:/Program Files/boost/boost_1_36_0
47 18 Anonymous
48
Another error you might encounter in CMake is "The C compiler "cl" is not able to compile a simple test program." This means that your Visual Studio won't find 'cmd' as it isn't configured correctly.
49
50 39 Charles Brockman
What you must do is change the MSVC options (Tools menu > Options > Project and Solutions > VC++ Directories) to ensure that
51 18 Anonymous
52 1 Pieter Libin
*    $(SystemRoot)
53 18 Anonymous
*    $(SystemRoot)\System32
54 1 Pieter Libin
*    $(SystemRoot)\System32\wbem
55 18 Anonymous
56 39 Charles Brockman
are specified BEFORE $(PATH).
57 18 Anonymous
58 1 Pieter Libin
Press 'Configure' again. A few messages about the FCGI and wthttpd connector may pop up; just click Ok. A few new configuration fields (in red) will have popped up; leave them unchanged and press 'Configure' once more. If all went well, you have now no red fields left and the configuration is complete. Press Generate (in cmake <2.8, this button is called 'Ok') and your MSVC solution files will be generated.
59 35 Wim Dumon
60 1 Pieter Libin
h3. Compiling Wt 
61 13 Pieter Libin
62 1 Pieter Libin
Open the WT.sln solution in the 'Where to build the binaries' directory of the previous step. Press F7, or select the projects you want to build manually. You should not get any compile or link errors.
63 39 Charles Brockman
64 1 Pieter Libin
h3. Installing Wt 
65
66 41 Charles Brockman
After compilation, open the Solution Explorer and right-click on the 'INSTALL' project. Select 'build'. This will copy the Wt header files and libraries to c:/Program Files/WT.
67 1 Pieter Libin
68 13 Pieter Libin
h2. Optional Components 
69 38 Charles Brockman
70 1 Pieter Libin
This involves installing SSL, zlib and some other components. After installation as described here, rerun CMake. These instructions are valid for Wt > 2.1.0.
71 13 Pieter Libin
72 1 Pieter Libin
h3. Preparations 
73 13 Pieter Libin
74 1 Pieter Libin
In order to avoid setting paths to small libraries separately, we create a repository where we store them all. CMake will find this repository without assistance if you call it 'c:\libraries'.
75 39 Charles Brockman
<pre>
76 13 Pieter Libin
mkdir c:\libraries
77 38 Charles Brockman
mkdir c:\libraries\lib
78 1 Pieter Libin
mkdir c:\libraries\include
79
</pre>
80
81
h3. Download and Build zlib 
82
83
Zlib is an optional dependency of Wt, which can be controlled by the CMake flag HTTP_WITH_ZLIB. With zlib, Wt compresses all http traffic by default, saving bandwidth.
84
85
* Download the zlib library from the "zlib home page":http://www.zlib.net/ Select your preferred format (tar.gz, tar.bz2 or zip) and download location. 
86
* In Microsoft Visual Studio, open zlib-1.2.x\contrib\vstudio\vc8\zlibvc.sln.
87
* Select solution 'Debug', architecture 'Win32' (in the toolbar)
88
* Right-click on project 'zlibstat', select Properties. In 'Configuration Properties'->'C/C++'->'Code Generation'->'Runtime Libraries' and set it to 'Multi-threaded Debug DLL (/MDd)'. Close the properties window.
89
* Do the same with project 'zlibvc'
90
* Right-click on project 'zlibstat', and select 'Build' to build it.
91
* Select solution 'Release', architecture 'Win32' 
92
* Right-click on project 'zlibstat', select Properties. In 'Configuration Properties'->'C/C++'->'Code Generation'->'Runtime Libraries' and set it to 'Multi-threaded DLL (/MD)'. Close the properties window.
93
* Do the same with project 'zlibvc'* Right-click on project 'zlibstat', and select 'Build' to build it.
94
95
The results are now located in the x86 directory. Copy them into our central repository location, renaming the debug library in the process:
96
<pre>
97
cp contrib\vstudio\vc8\x86\ZlibStatDebug\zlibstat.lib c:\libraries\lib\zlibstatd.lib
98
cp contrib\vstudio\vc8\x86\ZlibStatRelease\zlibstat.lib c:\libraries\lib\
99
</pre>
100
We also need zlib.h and zconf.h header files.
101
<pre>
102
cp zlib.h zconf.h c:\libraries\include
103
</pre>
104
105
h3. OpenSSL 
106
107
You need OpenSSL if you want to use Wt to support https mode. Grab a pre-compiled binary from http://www.openssl.org/related/binaries.html, install it in the default path (c:\OpenSSL) and Wt's CMake files will find and use OpenSSL. (Verify that HTTP_WITH_SSL is enabled.)
108
109
h3. GraphicsMagick
110
111
The generic build instructions for GraphicsMagick are found here: http://www.graphicsmagick.org/INSTALL-windows.html#installing-from-source-code
112
113
In order for GraphicsMagick to work with your version of MSVC, it is strongly recommended to build it from the sources. Follow the instructions on the GraphicsMagick site:
114
* Run @VisualMagick/configure/configure.exe@ to create a .sln file
115
* Make sure to select the default 'Dynamic Multi-threaded DLL runtimes' and 'Use X11 stubs to prevent use of X windows'
116
* Open @VisualMagick/VisualStaticMT.sln@ in MSVC and press F7. Make sure you select the 'Release' or 'Debug' build as appropriate. For me, the UTIL_IMDisplay project fails to compile, which is unimportant.
117
118
While configuring Wt, point GM_PREFIX to the toplevel directory of GraphicsMagick (i.e. the one containing subdirectories VisualMagick and magick). Press Configure, and CMake should find the header files and compiled binaries.
119
120
Important: when executing a binary linked to a Wt library that uses GraphicsMagick, the GraphicsMagick DLLs must be found by Windows. This means that they should be in c:/windows/system32, or in the current working directory, or that you should add the VisualMagick/bin directory to your path. Otherwise your application will complain that it cannot find the required DLLs to start up.
121 39 Charles Brockman
122 13 Pieter Libin
In order to render fonts, verify that your imagemagick fonts are correctly configured. For example, on my computer I had to remove the include for type-ghostscript.mgk in the VisualMagick/bin/type.mgk file to have any fonts rendered at all.
123 41 Charles Brockman
124
h2. Running the Examples 
125
126
In the MSVC IDE right-click on the example project you want to run, and select 'Properties'. In Configuration Properties->Debugging, set the Command Arguments to
127
128
<pre>
129
--http-address=0.0.0.0 --http-port=8080 --deploy-path=/hello --docroot=.
130
</pre>
131
132
Wt builds static versions of all libraries by default and links against static Boost libraries by default. If you would choose to build dynamic libraries in the future (see remarks at the bottom of this page), the easiest way to locate the dependency DLLs is to append their location to the PATH variable. In order to do so, change the Environment field to contain a PATH directive:
133
<pre>
134
PATH=c:/libraries/lib;c:/Boost/lib;<path to wt.dll>;<path to wthttp.dll>
135
</pre>
136
137
Right-click on the example project you want to run and select 'Set as Startup Project'. Press F5 (Run). This will start the httpd server listening on all local interfaces, on port 8080, and you may browse the example at http://127.0.0.1:8080/hello
138
139
Examples that need extra files to run should be executed from their source directory in order to find their dependency files (icons, CSS files, etc). Watch for 404 errors in Wt's output. To do so, set the 'Working directory' for the example to wt-2.x.x/examples/ExampleName. Some examples (e.g. the Wt home page) need the 'resources' directory to work correctly. Copy the wt-2.x.x/resources to the example's source directory to solve this problem. Other examples (such as the Charts example) may require the installation of ExtJs. See the Wt reference manual for more information on how to obtain and install ExtJs.
140
141
These are all the command-line options that are available (run the wt application with --help to see the newer options available in your version):
142
<pre>
143
General options:
144
  -h [ --help ]              produce help message
145
  -t [ --threads ] arg (=10) number of threads
146
  --docroot arg              document root for static files
147
  --no-compression           do not compress dynamic text/html and text/plain 
148
                             responses
149
  --deploy-path arg (=/)     location for deployment
150
151
HTTP server options:
152
  --http-address arg    IPv4 (e.g. 0.0.0.0) or IPv6 Address (e.g. 0::0)
153
  --http-port arg (=80) HTTP port (e.g. 80)
154
155
HTTPS server options:
156
  --https-address arg     IPv4 (e.g. 0.0.0.0) or IPv6 Address (e.g. 0::0)
157
  --https-port arg (=443) HTTPS port (e.g. 443)
158
  --ssl-certificate arg   SSL server certificate chain file
159
                          e.g. "/etc/ssl/certs/vsign1.pem"
160
  --ssl-private-key arg   SSL server private key file
161
                          e.g. "/etc/ssl/private/company.pem"
162
  --ssl-tmp-dh arg        File for temporary Diffie-Hellman parameters
163
                          e.g. "/etc/ssl/dh512.pem"
164
</pre>
165 27 Wim Dumon
166 13 Pieter Libin
h2. Important Remarks 
167 1 Pieter Libin
168 38 Charles Brockman
By default, Wt will build static libraries that are statically linked against Boost. While this is convenient for quick deployment (the example binaries do not require DLLs to run, so you do not have to set their PATHs correctly), many people prefer to use DLLs, not in the least because your Wt applications will link much faster.
169 1 Pieter Libin
170 38 Charles Brockman
Two CMake options control how Wt is built, and what kind of Boost libraries it uses:
171
* BOOST_DYNAMIC: set to true to build against Boost DLLs. Set to false to link to static Boost libraries.
172 13 Pieter Libin
* SHARED_LIBS: set to true to build a Wt DLL, set to false to build a static Wt library.
173 1 Pieter Libin
174 38 Charles Brockman
If you double-checked the library directories but still get build errors such as "cannot open file 'libboost_signals-vc90-mt-gd-1_35.lib'", you probably did not install or build the static Boost files, while the BOOST_DYNAMIC option is set to false. Similarly, when the error indicates that boost_signals-vc90-mt-gd-1_35.lib is not found, you probably haven't installed or built the Boost DLLs, while BOOST_DYNAMIC is set to true.
175 10 Pieter Libin
176 38 Charles Brockman
Note that when you build a static Wt library (SHARED_LIBS is false), you will get these Boost-related linker errors only when you compile the examples.
177 25 Wim Dumon
178
h2. Support for Microsoft IIS
179
180
Wt works well with Microsoft IIS as ISAPI extensions. See the [[ISAPI on Microsoft IIS]] wiki for more information on how to deploy Wt in IIS.