Project

General

Profile

Installing Wt on Ubuntu » History » Version 51

Zhora Melezhko, 09/07/2015 11:23 PM

1 1 Pieter Libin
h1. Installing Wt on Ubuntu
2
3
{{toc}}
4
5
For installation of Wt on Ubuntu, you have the choice between the official package available in Ubuntu, prebuilt packages by Pau Garcia i Quiles (always updated to the newest Wt version) or installation from source.
6
7 24 Charles Brockman
h2. Installing from the Official Package
8 1 Pieter Libin
9 51 Zhora Melezhko
Since Ubuntu Intrepid (8.10), official packages for Ubuntu are available. To install Wt, run:
10 1 Pieter Libin
11
<pre>
12 51 Zhora Melezhko
 $ sudo aptitude install witty witty-dbg witty-dev witty-doc
13 1 Pieter Libin
</pre>
14 50 Koen Deforche
15 51 Zhora Melezhko
This will automatically install all the required dependencies. If you only want the runtime library, you only need to install the witty package. The witty-dbg package contains the debug versions of the libraries. Make sure you install witty-dev (or libwtwhatever-dev) if you want to develop Wt applications.
16
17 1 Pieter Libin
The official package is usually a bit outdated due to the stabilization periods Debian and Ubuntu need prior to release. If you want to use the newest version of Wt and not build from source, read on.
18
19 51 Zhora Melezhko
h2. Installing from Prebuilt Packages  ghdg
20 1 Pieter Libin
21 10 Pau Garcia i Quiles
Since Wt 2.0.3, unofficial packages for Ubuntu are being built by "Pau Garcia i Quiles":http://www.elpauer.org/. To install Wt, add the "Wt PPA":http://launchpad.net/~pgquiles/+archive/wt to your repositories (check "Adding this PPA to your system" in the Wt PPA page). After adding the repository to your system, run:
22 1 Pieter Libin
23
<pre>
24
 $ sudo apt-get update
25
 $ sudo aptitude install libwt*
26
</pre>
27
28 21 Jake Petroules
This will automatically install all the required dependencies. If you only want the runtime library, you only need to install the libwt24, libwthttp24, libwtext24, etc packages (no -dev, -doc or -dbg packages). The libwt-dbg package contains the debug versions of the libraries.
29 1 Pieter Libin
30
These packages are built by the maintainer of the official Debian and Ubuntu packages and are always updated to the latest version of Wt. If you want to use the newest version of Wt and not build from source, this is the preferred method.
31
32
Please note in the past packages were named witty, witty-dev, witty-doc and witty-dbg. These package still exist but only as transitional packages and will be removed in the future. It is recommended that you install libwt*.
33
34 4 Pau Garcia i Quiles
h2. Installing from Sources
35 1 Pieter Libin
36 51 Zhora Melezhko
37 1 Pieter Libin
h3. Installing System Dependencies
38
39 42 Wim Dumon
Minimal dependencies:
40
<pre>
41 51 Zhora Melezhko
sudo apt-get install gcc g++ libboost-all-dev cmake
42 42 Wim Dumon
</pre>
43
44 51 Zhora Melezhko
Optional dependencies (among others):
45 1 Pieter Libin
<pre>
46 51 Zhora Melezhko
sudo apt-get install doxygen libgraphicsmagick3 libssl-dev libpq-dev libssl-dev libfcgi-dev
47 1 Pieter Libin
</pre>
48
49 51 Zhora Melezhko
Get Wt:
50 45 Wim Dumon
51 46 Wim Dumon
Go to http://www.webtoolkit.eu/wt/download or download using wget:
52 1 Pieter Libin
53 36 Wim Dumon
<pre>
54
 wget -c http://kent.dl.sourceforge.net/sourceforge/witty/wt-x.y.z.tar.gz
55 1 Pieter Libin
 tar xvxf wt-x.y.z.tar.gz
56 36 Wim Dumon
</pre>
57 1 Pieter Libin
58
h3. Build Wt from sources
59 36 Wim Dumon
60 44 Wim Dumon
See also http://www.webtoolkit.eu/wt/doc/reference/html/InstallationUnix.html
61
62
<pre>
63
cd wt-x.y.z
64 51 Zhora Melezhko
mkdir build; cd build
65
cmake ..
66 36 Wim Dumon
make
67
make -C examples
68 1 Pieter Libin
</pre>
69 36 Wim Dumon
To install wt in /usr/local:
70 1 Pieter Libin
<pre>
71
 sudo make install
72
 sudo ldconfig
73
</pre>
74
75 36 Wim Dumon
h2. Try the Examples
76 1 Pieter Libin
77 24 Charles Brockman
h4. From the Prebuilt Packages
78 1 Pieter Libin
79 24 Charles Brockman
* To build the examples, call CMake this way:
80 1 Pieter Libin
81
<pre>
82
  cmake -DWT_SOURCE_DIR=/usr/share/doc/witty-doc/ -DEXAMPLES_CONNECTOR="wt;wthttp" /usr/share/doc/witty-doc/examples
83
</pre>
84
85
* Then go to */usr/share/doc/witty-doc/examples* and enter the directory of the example you want to run. 
86
87
* When running the example, set the docroot to "."   
88
89
* For instance, if you compiled the examples in /home/user/dev/wtexamples, you would do:
90
91 9 Koen Deforche
<pre>
92 47 Wim Dumon
  $ mkdir /home/user/dev/wtexamples
93 1 Pieter Libin
  $ cd /home/user/dev/wtexamples
94 48 Wim Dumon
  $ cmake -DWT_SOURCE_DIR=/usr/share/doc/witty-doc/ -DEXAMPLES_CONNECTOR="wt;wthttp" /usr/share/doc/witty-doc/examples
95
  $ make
96
  $ cd /usr/share/doc/witty-doc/examples/charts
97
  $ /home/user/dev/wtexamples/charts/charts.wt --http-port 10000 --http-addr 0.0.0.0 --docroot .
98
</pre>
99
100
h4. From the Sources
101
102
* If you installed Wt using the source packages (http://sourceforge.net/projects/witty/files/), then you can find instructions on how to run the examples in the file *INSTALL.html* that is included in the main directory of the respective source package.
103
104 47 Wim Dumon
h4. Special Cases
105 33 Anonymous
106
* Please note the widget gallery example will not run properly unless you download tinymce and extract it the proper place.
107 36 Wim Dumon
108 35 Anonymous
* Please note the wtwithqt example needs Qt 4.x to run
109
110 51 Zhora Melezhko
h2. Using 'ccmake' to Edit Build Options [[http://forum.zip-driver.ru/ Driver]]
111
112 33 Anonymous
This is an easy, graphical way to edit the build options
113
114
<pre>
115 24 Charles Brockman
 cd build
116 18 darren sy
 ccmake .
117
</pre>